Novel thionin-functionalised core shell magnetic nanoparticles for dispersive solid-phase extraction of Hg(II) in food and water samples

To develop an accurate and precise method for separation and pre-concentration of Hg(II), a novel thionin functionalised core shell structure magnetic material has been prepared and characterised. The extraction ability of the material was evaluated by magnetic solid-phase extraction coupled with inductively coupled plasma mass spectrometry determination of Hg(II) in food and water samples. Combining the advantages of magnetic separation with selective extraction of thionin towards Hg(II), the material exhibits enhanced enrich selectivity and efficiency for Hg(II). The experimental parameters influencing Hg(II) extraction efficiency, including pH of the aqueous solution, the dosage of the adsorbent, extraction time and sample volume, were systematically investigated. Under the optimised conditions, concentration of Hg(II) at 1.0 μg L^?1 can be successfully enriched by the material without the interference of the common co-existing ions. The enrichment factor and adsorption capacity were 250 and 75.2 mg g^?1, and precise of the method was confirmed by analysing the spiked food, water samples and standard water reference samples with the recoveries of 92.5–101.8%.     

Research Progress and Application of Ion Funnel Technique

Ion funnel is a new-style ion guider which can reduce spatial divergence and energy dispersity of the transmission ions by using radio frequency (RF) electric field to confine the ions radially and the direct current (DC) axial electric field to move the ions toward the exit, and thus it can greatly increase the ion transmission efficiency and improve the sensitivity of the mass spectrometry. Since ion funnel was invented in 1997, it has attracted a close attention of mass spectrometry scientists all over the world. Ion funnel has been used in various kinds of mass spectrometry, and built a bridge with high efficiency ion transmission between low vacuum ionization source and high vacuum mass analyzer. In this paper, the principle, technology development, and application progress of ion funnel are reviewed, and the future prospects are prospected.     

Determination of sugars and cyclitols isolated from various morphological parts of Medicago sativa L

Plant research interest has increased all over the world, and a large body of evidence has been collected to show the huge potential of medicinal plants in various disease treatments. Medicago sativa L., known as alfalfa, is a rich source of biologically active components and secondary metabolites and was frequently used from the ancient times both as fodder crop and as a traditional medicine in the treatment of various diseases. Cyclitols, naturally occurring in this plant, have a particular interest for us due to their significant anti‐diabetic, antioxidant, anti‐inflammatory, and anti‐cancer properties. In the present study we revealed the isolation, the identification, and the quantification of some cyclitols and sugars extracted from different morphological parts of alfalfa plant. Soxhlet extraction and solid phase extraction were used as extraction and purification methods, while for the analyses derivatization followed by gas chromatography with mass spectrometry was involved. The obtained results showed significant differences in the quantities of cyclitols and sugars found in the investigated morphological parts, ranging between 0.02 and 13.86 mg/g of plant in case of cyclitols, and in the range of 0.09 and 40.09 mg/g of plant for sugars. However, roots have the richest part of cyclitols and sugars in contrast to the leaves.     

常压下玉米秸秆液化工艺的优化及其生物油分析

随着化石能源的日益短缺，可再生木质生物质资源的利用越来越受到重视，常压液化技术是生物质资源高效利用的主要方式之一。利用单因素方法，探讨液化温度、复配液化剂二甘醇（DEG）与1,2-丙二醇（PG）的混合比、液固比、催化剂磷酸的用量、反应时间等因素对玉米秸秆液化得率的影响，以便优化其液化工艺；然后采用热重分析仪（TGA）、气相色谱-质谱技术（GC-MS）和核磁共振（NMR）技术对此优化条件下所得生物油的挥发降解特性和主要组成成分进行了检测探讨。分析表明，玉米秸秆液化时优化工艺参数为：液化温度170 ℃，液化剂DEG与PG混合比1∶2，液固比5∶1，H₃PO₄用量10%，反应时间45 min；此时玉米秸秆液化得率高至99.50%。TGA结果表明，此条件下所得生物油含有80%以上碳数小于25的化合物，热解后最终残炭量约为15%。GC-MS表明，可以检测出此生物油中含有的39种有机物，其中，醇类有机物的含量最多，酚类有机物的含量次之，它们相对含量依次是70.70%和25.63%，其还含有一定量的有机酸（2.80%）、醚类（0.64%）、酯类（0.10%）和酮类（0.13%）等有机物；其组分十分复杂，高含氧量，稳定性较差。1H-和13C-NMR分析表明，不同化学位移δ与生物油中不同类型的质子和碳原子相对应，明确生物油中不同类型H和C的分布，有利于对其分子结构进行深入探讨。这些研究为非木材生物质高效液化条件的选择及液化产物制备化学品和生物燃油给予理论基础与应用支持，促进了生物质资源的有效转化利用及其生物质基产品的开发。     

A BODIPY-based highly emissive dye with thiophene-based branch harvesting the light

ABSTRACT

A novel BODIPY-based dye with highly emissive character was configured by Sonogashira coupling and routinely characterized by NMR and MS technology. The emission of dye was investigated in solution/film/solid and shows intensive emission. In solution, the emission peak appeared around 510 nm with little influence by the polar environment. The terthiophene plays an effective antenna effect, harvesting the light and transferring the energy to BODIPY. The pseudo Stoke's shift enlarged to ～170 nm in solution. In film, the emission peak shifted to 563 nm in polycarbonate matrix. And it shifted further to 585 nm in solid due to the highly twisted structure, which avoided closely regular-tight packing. The dye rendered an intense fluorescence, good optothermal stability, and high fluorescence quantum yield (0.55). The solid emission showed highly red emission with Commission Internationale de L'Eclairage (CIE) coordinates of (X = 0.69, Y = 0.31). Thus, the synthesized dye is idea candidate for emitting materials.     

Promotion of a quality standard for Porana sinensis Hemsl. based on the efficacy-oriented Effect-Constituent Index

Multicompound determination for the quality control of traditional Chinese medicine (TCM) may often be inadequate, since these compounds may not be associated with, or fully represent, the clinical effects of TCM. Moreover, the individual contributions of each constituent to the pharmacological effect are often not considered. In China, Porana sinensis is widely used as a substitute for Erycibe sources to treat joint pain and rheumatoid arthritis. The existing quality control methods for P. sinensis neither consider the individual contributions of various compounds nor control the actual quality associated with different clinical efficacies. In the present study, a novel efficacy-oriented approach, named the effect-constituent index (ECI), was established for P. sinensis. Analyses of the spectrum–effect relationship and components in rat plasma were conducted to systematically and scientifically select quality markers. Quantitative analysis of multicomponents via a single marker method was introduced to enhance the practical application value of the established ECI. The established ECI shows a good ability to distinguish and predict the bioeffect-based quality of P. sinensis. The present study also provides a reference for the establishment and application of ECI as a quality control method for TCMs.     

Nonlinear dynamical magnetosonic wave interactions and collisions in magnetized plasma

The one-dimensional nonlinear dynamical wave interactions in a system of quasineutral two-fluid plasma in a constant magnetic field are investigated.The existence of the travelling wave solutions is discussed.The modulation stability of linear waves and the modulation instability of weakly nonlinear waves are presented.Both suggest that the Korteweg-de Vries(KdV) system is modulationally stable.Besides,the wave interactions including the periodic wave interaction and the solitary wave interaction are captured and presented.It is shown that these interacting waves alternately exchange their energy during propagation.The Fourier spectrum analysis is used to depict the energy transformation between the primary and harmonic waves.It is known that the wave interactions in magnetized plasma play an important role in various processes of heating and energy transportation in space and astrophysical plasma.However,few researchers have considered such magnetohydrodynamic(MHD) wave interactions in plasma.It is expected that this work can provide additional insight into understanding of behaviors of MHD wave interactions.     

Mass spectrometry imaging of latent fingerprints using titanium oxide development powder as an existing matrix

Recent research has focused on increasing the evidentiary value of latent fingerprints through chemical analysis. Although researchers have optimized the use of organic and metal matrices for matrix‐assisted laser desorption/ionization‐mass spectrometry imaging (MALDI‐MSI) of latent fingerprints, the use of development powders as matrices has not been fully investigated. Carbon forensic powder (CFP), a common nonporous development technique, was shown to be an efficient one‐step matrix; however, a high‐resolution mass spectrometer was required in the low mass range due to carbon clusters. Titanium oxide (TiO₂) is another commonly used development powder, especially for dark nonporous surfaces. Here, forensic TiO₂ powder is utilized as a single‐step development and matrix technique for chemical imaging of latent fingerprints without the requirement of a high‐resolution mass spectrometer. All studied compounds were successfully detected when TiO₂ was used as the matrix in positive mode, although, generally, the overall ion signals were lower than the previously studied CFP. TiO₂ provided quality mass spectrometry (MS) images of endogenous and exogenous latent fingerprint compounds. The subsequent addition of traditional matrices on top of the TiO₂ powder was ineffective for universal detection of latent fingerprint compounds. Forensic TiO₂ development powder works as an efficient single‐step development and matrix technique for MALDI‐MSI analysis of latent fingerprints in positive mode and does not require a high‐resolution mass spectrometer for analysis.     

TADF激基复合物主体材料提升溶液法制备蓝色荧光有机发光二极管的效率

为了提升溶液法制备的蓝色荧光有机发光二极管(OLEDs)的效率,采用了基于热激活延迟发光(TADF)的激基复合物作为主体材料。TADF激基复合物主体可以利用反向系间窜跃上转换形成单线态激子并将能量传递到客体,从而可以同时利用发光层中的三线态激子和单线态激子,以提升蓝色荧光器件的效率。选择蓝色荧光材料1-4-Di-[4-(N,N-diphenyl)amino]styryl-benzene(DSA-ph)作为客体发光材料,4,4′,4″-T-ris(carbazol-9-yl)triphenylamine(TCTA)掺杂1,3,5-Tri(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl)(TPBi)作为热激活延迟荧光激基复合物主体,通过溶液法制备了蓝色荧光OLEDs。通过测试TCTA,TPBi以及TCTA掺杂TPBi的光致发光光谱发现,与TCTA和TPBi相比,TCTA掺杂TPBi的光致发光谱(PL)发生了明显的红移(峰值波长变为437 nm),而且光谱变宽,证明了TCTA∶TPBi激基复合物的形成。通过对于DSA-ph掺杂激基复合物主体的薄膜与DSA-ph掺杂poly(methyl methacrylate)(PMMA)的薄膜进行PL测试发现,两者发光峰相同,都是来自DSA-ph的发光,说明激基复合物主体将能量传递到了DSA-ph;DSA-ph的吸收光谱与激基复合物主体的PL光谱存在很大重叠,说明激基复合物主体与DSA-ph的能量传递非常有效;通过对激基复合物主体掺杂不同浓度客体的薄膜进行瞬态PL衰减测试发现,与纯DSA-ph的寿命相比,DSA-ph掺杂激基复合物主体之后其寿命会延长,纯DSA-ph的寿命只有1.19 ns,DSA-ph掺杂激基复合物主体的荧光衰减曲线与激基复合物主体的荧光衰减曲线相似,这进一步证明了激基复合物主体将能量传递到了DSA-ph。研究了主体引入以及DSA-ph掺杂浓度对器件性能的影响。对于器件的亮度、电流密度、电压、电流效率、电致发光光谱等参数进行了测试,与不采用激基复合物主体的器件相比,采用激基复合物主体的器件性能明显改善,在DSA-ph掺杂浓度为10%时,器件亮度从2133.6 cd·m^-2提升到了3597.6 cd·m^-2,器件效率从1.44 cd·A-1提升到了3.15 cd·A-1,发光峰只有来自DSA-ph的发光。采用TADF激基复合物主体的方法有潜力实现溶液法制备的高效蓝色荧光OLEDs。     

铜铁镁三掺铌酸锂晶体的第一性原理研究

利用基于密度泛函理论的第一性原理,研究了Cu:Fe:Mg:LiNbO3晶体及对比组的电子结构和光学特性.研究显示,单掺铜或铁铌酸锂晶体的杂质能级分别由Cu 3d轨道或Fe 3d轨道贡献,禁带宽度分别为3.45和3.42 eV;铜、铁共掺铌酸锂晶体杂质能级由Cu和Fe的3d轨道共同贡献,禁带宽度为3.24 eV,吸收峰分别在3.01,2.53和1.36 eV处;Cu:Fe:Mg:LiNbO3晶体中Mg^2+浓度低于阈值或高于阈值(阈值约为6.0 mol%)的禁带宽度分别为2.89 eV或3.30 eV,吸收峰分别位于2.45 eV,1.89 eV或2.89 eV,2.59 eV,2.24 eV.Mg^2+浓度高于阈值,会使吸收边较低于阈值情况红移;并使得部分Fe^3+占Nb位,引起晶体场改变,从而改变吸收峰位置和强度.双光存储应用中可选取2.9 eV作为擦除光,2.5 eV作为读取和写入光,选取Mg^2+浓度达到阈值的三掺晶体在增加动态范围和灵敏度等参量以及优化再现图像的质量等方面更具优势.